Separation Pressure Lever - Ricoh PRIPORT JP730 Operating Instructions Manual

Operation

Separation Pressure Lever

A
To prevent double-feed, adjust
1
the paper separation pressure us-
ing the separation pressure lever.
Note
❒ Paper separation pressure can
be adjusted according to the pa-
per weights as shown in the fol-
lowing table.
Posi-
tion
1
*1
2
3
4
5
*1
This position can also be used if
the leading edge of the paper is
curled, or when the paper does
not feed properly.
26
Metric version Inch version
Use this position if the lead-
ing edge of the paper is
curled, or when the paper
does not feed properly at Po-
sition 2.
9.3 – 12.5 lb.,
2
35–47.0 g/m ,
21.7–34.0 lb.
81.6–127.9
2
g/m
2 12.6–21.6 lb.
47.1–81.5 g/m
Use this position when a
double-feed occurs.
Use this position if double-
feeds persist even after the
lever has been shifted to Po-
sition 4.