Troubleshooting
❖ When the open cover/unit indicator (M) lights up
Indicator
M
M and "M" Set the drum.
M and "D" Close the plotter cover.
M and "E"
❖ When the supply/exchange indicators light up
Indicator
B and "A" Load more paper.
4
j
C
k
-When a service code (E-XX) is displayed
Turn the main switch off and on. If a service code appears again, contact your
service representative.
Note
❒ If a service code appears on the display after you turn the main switch off and
on a few times, do not continue turning it on and off. Leave the machine off.
❒ E04 might be displayed when you make masters continuously using the orig-
inals that have solid images. In the case, turn off the main switch and wait for
a while.
46
Meaning
Close the front door or the right side
cover.
Close the master eject box.
Meaning
Load new ink cartridge.
Load new master roll.
Empty master eject box.
Page
p.58 "When the Open Cover/Unit Indica-
tor (M) Lights"
Page
p.37 "Loading Paper into the Paper Feed
Tray".
p.39 "When the Add Ink Indicator (j)
Lights".
p.42 "Master Roll Replacement".
p.60 "When the Master Eject Indicator
(k) Lights".