TC45 TC45 JAVA User's Guide
Confidential / Released
9.4.1 Switch on Autostart
· There is an AT command, at^scfg, to configure the autostart functionality. Please refer to
the AT Command Set [4].
· Restart the module.
9.4.2 Switch off Autostart
To switch off autostart functionality there are two possibilities:
· at command at^scfg
· tool "autostart_off.exe" (included in the Installation CD software)
To disable the automatic start of a user application in a module these steps have to be done:
1. Connect the module to the PC
2. Make sure, that the module is switched off
3. Start the Autostart_Off program
4. Select the COM-Port
5. Press the "Autostart Off" button
TC45_JAVA User's Guide_V02
Page 48 of 72
30.06.2003