Table of Contents
Advertisement
2.14 DiskOnChip™ Address Setting
The NuPRO-630 provides a U17 socket for install the DiskOnChip™ module.
A JP7 may select the starting memory address of the DiskOnChip™ (D.O.C.)
for avoid the mapping area with any other memory devices. If you have another
extra memory devices in the system with the same memory, neither the
NuPRO-630 nor the extra memory devices will function normally. Please setting
both at different memory address mapping.
JP7 : DiskOnChip™ Address
l
Memory Address Mapping
D000
D800
E000
E800
*) : default setting
The D.O.C. function allows the system in using without FDD nor HDD. The
D.O.C. may formatting as driver C: or driver A:. User may also easily uses the
DOS's commands such as FORMAT, SYS, COPY, XCOPY, DISCOPY and
DISKCOMP etc. This is means that the D.O.C. may uses as driver-A if the
system without FDD-A for ambient application. Please contact with your
supplier for different size D.O.C. module.
2-10 Hardware Installation
JP7
* 1-2
3-4
5-6
7-8
Advertisement
Table of Contents
