Table of Contents
Advertisement
2.6 Jumper Setting Description
A jumper pin-set is ON as a shorted circuit with a plastic cap inserted over two
pins. A jumper pin-set is OFF as a open circuit with a plastic cap inserted over
one or no pin(s) between pins. The below figure 2.2 shows the examples of
different jumper pin-set setting as ON or OFF in this manual.
Figure 2.2
All jumper pin-set already has its default setting with the plastic cap inserted as
ON, or without the plastic cap inserted as OFF. The default setting may reference
in this manual with a " * " symbol in front of the selected item.
Hardware Installation 2-5
Advertisement
Table of Contents
