Ricoh Laser MFP Printer User Manual page 76

Message Meaning
Retry Redial? The machine is
waiting for a
specified time
interval to redial a
previously busy
station.
Scanner locked The scanner module
is locked
Self Diagnostic The LSU (Laser
LSU Scanning Unit) in
your printer is
checking some
problems detected.
Self Diagnostic The engine in your
Temperature machine is checking
some problems
detected.
Send Error There is a problem
in SMTP
(AUTH)
authentication.
Send Error There is a problem
in DNS.
(DNS)
Send Error There is a problem
in POP3.
(POP3)
Send Error There is a problem
in SMTP.
(SMTP)
Send Error There is a problem
on the network
(Wrong Config)
interface card.
[Stop Pressed] Stop/Clear has
been pressed during
a fax transmission.
Tray 1 There is no paper in
Paper Empty the tray 1.
Tray 2 There is no paper in
Paper Empty the optional tray 2.
Suggested solutions
You can press OK to
immediately redial, or
Stop/Clear to cancel the
redial operation.
Unlock the scanner and
press Stop/Clear.
Please wait a few
minutes.
Please wait a few
minutes.
Configure the
authentication setting.
Configure the DNS
setting.
Configure the POP3
setting.
Change to the available
server.
Configure your network
interface card correctly.
Try again.
Load paper in the tray 1.
See page 5.5.
Load paper in the
optional tray 2. See page
5.5.
14.9
<Troubleshooting>