Programming An End Receiver - Ricoh Aficio MP 161F Operating Instructions Manual

Programming an End Receiver

Important
❒ One end receiver can be registered for each special sender. To register two or
more end receivers, use group destination. How ever maximum of 100 desti-
nations can be specified in a group.
A
Select [Fax Features] using {U} or {T}, and then press the {OK} key.
B
Select [Administrator Tools] using {U} or {T}, and then press the {OK} key.
C
Select [Forwarding] using {U} or {T}, and then press the {OK} key.
D
Select [On] using {U} or {T}, and then press the {OK} key.
To cancel forwarding, press [Off] and proceed to step
E
Search and select a receiver using the Quick Dial keys or the [
and then press the {OK} key.
If you make a mistake, press the {Clear/Stop} key, and then enter again.
Forwarding
F
.
4
],
93