Problem
The copied images differ.
Adjust Image
Problem
In Double Copies mode,
parts of the original image
are not copied.
In Border, Center, or Cen-
ter/Border mode, parts of
the original image are not
copied.
In Margin Adjustment
mode, parts of the original
image are not copied.
In Image Repeat mode, the
original image is not cop-
ied repeatedly.
Combine
Problem
You cannot make a book
from a booklet or magazine
by folding copies.
Cause
The "Original Mode Quali-
ty Level" of the User Tools
settings are not the same.
The installation of the op-
tional finisher or booklet
finisher in both units are
not the same.
Cause
Combination of original
and copy paper is not cor-
rect.
You set the wide erased
margin.
Your original has narrow
margins on four sides.
You set the wide erased
margin.
You selected the same size
copy paper as originals,
and did not select the prop-
er reproduction ratio.
Cause
Combine Original Booklet
Format or Combine Origi-
nal Magazine Format is not
correct.
If You Cannot Make Copies As You Want
Action
See "Original Mode Quali-
ty Level" in
P.310 "Gen-
1
eral Features
/
".
3
Press the [Connect] key to
exit Connect Copy mode,
then start copying.
Action
Select the proper original
and copy paper. See
P.165 "Double Copies".
Set the narrow margin with
the User Tools. See "Erase
Border" and "Erase Cen-
ter" in
P.317 "Page For-
1
mat
/
".
2
Set the narrow margin with
the User Tools. See "Front
Margin: Left/Right" and
"Back Margin: Left/Right"
in
P.317 "Page Format
".
2
Select copy paper larger
than the originals.
Select the proper reproduc-
tion ratio.
Action
Change the setting. See
P.115 "Combine".
5
1
/
259