Relationship Between Master Unit and
Sub-Unit System Settings
This section describes which System Settings are used by the master unit and
sub-unit in Connect Copy mode.
Note
In Connect Copy mode, the {User Tools/Counter} key on the sub-unit is dis-
abled. To access the User Tools on the sub-unit, you need to exit Connect
Copy mode first.
Reference
For details, see the System Settings manual.
Symbol
—
Menu
Basic Page 1
Operation Panel Beeper
Ready Operation Panel
Beeper
Copy Count Display
Auto Response (Human)
Sensor
Auto Tray Switching
Auto Off Timer
Low Power Shift Time
Low Power Timer
Relationship Between Master Unit and Sub-Unit System Settings
Meaning
The master unit and sub-unit use each setting
Both units use the master unit setting
Unrelated
Depends on the function
Master
unit
—
—
—
Sub-unit
Remarks
—
The copy counter is always
displayed in count up mode.
Invalid
Disabled even if the sub-unit
setting is "Yes".
—
—
In Connect Copy mode, nei-
ther unit will enter any of En-
—
ergy Saver modes (Low
Power mode, Energy Saver
mode). When Connect Copy
is exited, the machines will
enter Energy Saver mode af-
ter the programmed delay
elapses.
4
239