1. Schematic representation shown. Do not use for specific connection locations.
2. Components are not supplied by Liebert but are required for proper circuit operation and maintenance. One or more additional pressure relief valves are required downstream
of any and all field installed isolation valves. Do not isolate any refrigerant circuits from over pressurization protection.
3. A trap at the base of the riser is required for proper circuit operation.
DPN002929
Page :1 /1
LIEBERT PDX
PIPING SCHEMATIC
AIR COOLED MODELS WITH TXV
OPTIONAL FIELD
INSTALLED
FUSIBLE PLUG
LIQUID
Sensing
Bulb
SUCTION
External
Service
Equalizer
Valve
HOT GAS DISCHARGE
Filter Drier
Sight
Glass
SERVICE / SCHRADER (ACCESS) CONNECTION NO VALVE CORE
SERVICE / SCHRADER (ACCESS) CONNECTION WITH VALVE CORE