TSI Instruments Quest The Edge Quick Start Manual page 5

Charging
When the battery is fully discharged, allow approximately 3 to 4 hours to recharge your Edge.
Tip: to quickly check battery power remaining on the Edge, press the up/down arrow key to view the
battery power symbol and hours on the display.
(See user manual for customizing display if it does not appear.)
1. To charge, plug in the power adapter to the EdgeDock.
+ The EdgeDock's lower LED will appear solid amber when powered on.
2. Slide the Edge downward onto the hook of the EdgeDock until it clicks. It should be fully seated.
+ The top LED will appear as red flashing if charging or solid green when fully charged.
Charging Status: Upper red flashing LED
Power Adapter
Battery Power: 48 hours and 52 minutes remaining
Powering Docking Station: LED appears as red flashing
5