Function Settings - Honeywell HDZ302LIK Configuration Manual

Function Settings

In the main OSD menu, move the cursor to FUNCTION SETTING, and then click the confirm
button.
PRESET
Move the cursor to PRESET and click the confirm button to go to the submenu, where you can
view or modify the following settings:
• PRESET NO
• TITLE
• SETTING
• CALL
For Pelco protocol users:
•
•
AUTO PAN
Move the cursor to AUTO PAN and click the confirm button to go to the submenu, where you
can view or modify the following settings:
• PAN SPEED
• CALL
• STOP
To change the preset number, click the left/right button.
Different protocols support different preset values.
The system automatically creates a title for the camera. To
modify it, click the left/right button.
After you have enabled the preset title function (in DISPLAY
SETTING > PRESET TITLE), input the preset number and then
select the monitor zone. Move the cursor to SETTING and click
the confirm button. The message: "PRESET: [NUMBER]"
appears, followed by "OK."
Repeat the above steps to set more presets. To modify a
preset, input the preset number you want to modify and then
follow the above steps to set the preset.
To call a preset, move the cursor to PRESET NO and then input
the preset number you want to call. Then move the cursor to
CALL and click the confirm button.
Call preset: Call preset 28 or preset 95 to go to the OSD menu. Call preset 29 or preset 99
to go to scan. Call preset 24 or preset 81 to go to pattern. Call preset 25 or preset 82 to go
to tour. Call preset 30 or preset 96 to stop scan or pattern. Call preset 31 or preset 83 to
begin rotation. Call preset 33 to enable PTZ 180 degrees rotation. Call preset 34 to set
dome position as 0.
Set preset: Set preset 26 or 92 to set scan left limit. Set preset 27 or 93 to set scan right
limit. Set preset 22 or 79 to begin record. Set preset 23 or 80 to stop record.
Sets the pan speed. Click the left/right button to set (1–8).
Move the cursor to CALL and click the confirm button. The
camera begins 360 degrees continuous rotation.
Move the cursor to STOP and click the confirm button. The
camera stops rotating.
Configuring Camera Settings Using the OSD | 21
800-21699 - A - 04/2016