Honeywell HDZ302LIK Configuration Manual page 24

24 | HDZ IR Series OSD Configuration Guide
Task Setting
Move the cursor to TASK SETTING and click the confirm button.
•
•
•
•
•
•
NEXT PAGE
Move the cursor to NEXT PAGE and click the confirm button to access the following additional
menu options: PTZ SPEED, SET ZERO, POWER UP, MENU PASSWORD, MENU IDLE TIME,
PTZ AUTO STOP, and PTZ CORRECTION.
PTZ SPEED
Sets the PTZ speed. Click the left/right button to set.
SET ZERO
Sets the PTZ initial position. Move the PTZ to the desired position, move the cursor to SET
ZERO, and then click the confirm button to complete the setting.
POWER UP
Sets the PTZ action when the camera boots up. Options include NONE, AUTO, SCAN, PRESET,
PATTERN, and TOUR. Click the left/right button to set. PARAMETER sets the serial number of
the corresponding operation (scan, preset, pattern, tour). Click the left/right button to set.
www.honeywell.com/security
WEEK: Here you can set the week information. Click the left/right button to set. You can
set for one day, or you can set for the whole week.
START TIME: Here you can set the task begin time. Move the cursor to current item and
then click the confirm button to set the time. Use the up/down button to set the detailed
value and then use the left/right button to go to the next setup item. When you completed
the setup, click the confirm button to exit start time setup, move the cursor to SAVE, and
then click the confirm button.
END TIME: Here you can set the task end time. Move the cursor to current item and then
click the confirm button to set the time. Use the up/down button to set the detailed value
and then use the left/right button to go to the next setup item. When you completed the
setup, click the confirm button to exit end time setup, move the cursor to SAVE, and then
click the confirm button.
ACTION TYPE: Options include tour, scan, preset, and pattern. Click the left/right button to
set.
ACTION NO: The serial number of the scheduled task. The number here may vary due to
different action types.
SAVE: After making changes, move the cursor to SAVE and click the confirm button.