Cisco ASR 903 Installation Manual page 83

Installing the Cisco ASR 903 Router
Step 1
Position the chassis in the rack as follows:
• If the front of the chassis (front panel) is at the front of the rack, insert the rear of the chassis between the mounting
posts.
• If the rear of the chassis is at the front of the rack, insert the front of the chassis between the mounting posts.
Step 2 Align the mounting holes in the bracket (and optional cable guide) with the mounting holes in the equipment rack.
Do not use interface module and power supply ejector handles to lift the chassis; using the handles to lift the
Caution
chassis can deform or damage the handles.
Figure 51: Installing the Chassis in a 19-inch EIA Rack
Figure 52: Installing the Chassis to support the Japanese JIS Rack Standard
Cisco ASR 903 and ASR 903U Aggregation Services Router Hardware Installation Guide
Installing the Router Chassis in the Rack
73