Patch Panels - Cisco ASR 903 Installation Manual
Aggregation services router hardware
Hide thumbs
Also See for ASR 903:
- Release notes (280 pages) ,
- Hardware installation manual (196 pages) ,
- Manual (147 pages)
Table of Contents
Advertisement
Overview
Figure 42: Cisco ASR 903 Router Serial Number Location
Patch Panels
The Cisco NCS 4206 has patch panels modules that provide interconnections with the interface modules.
The following table shows different types of patch panel:
Table 12: T1/E1 Patch Panel
Patch Panel
PANEL-48-1-DIN
PANEL-48-1-RJ48
PANEL-48-1-AMP64
Table 13: T3/E3 Patch Panel
Patch Panel
PANEL-48-3-DIN
PANEL-48-3-HDBNC
The interface modules, 48 X T1/E1 TDM interface module and 48 X T3/E3 TDM interface module supports
a maximum of 48 TDM ports. These ports are available on the interface module through three
Very-High-Density Cable Interconnect (VHDCI) connectors. The patch panels listed above make these 48
ports available to the customer.
Description
48X75 ohm E1/DS1 termination, through DIN 1.0/2.3 connectors
48X120 ohm E1/110 ohm DS1 termination, through RJ 48C connector
48X120 ohm E1/110 ohm DS1 termination, through 4xAMP 64-pin
Description
48X75 ohm E3/DS3 termination, through DIN 1.0/2.3 connectors
48X75 ohm E3/DS3 termination, through HDBNC connectors
Cisco ASR 903 and ASR 903U Aggregation Services Router Hardware Installation Guide
Patch Panels
43
Advertisement
Table of Contents
