Table of Contents
Advertisement
3
Components
Front Panel
1 - LED Status Lights
Displays the status of various NVR
operations (see table below)
2 - Remote Power Switch
2-pin terminal block for distant
power-on/off control
3 - SIM card Slot
Externally accessible SIM card slot
ROADRECORDER 8400 NVR USER GUIDE
LED
COLOR
Flashing Yellow
HDD status
Solid Green
Solid Red
3G status
Not Used
Solid Green
PoE status
Solid Red
Power
Solid Green
WiFi status
Not Used
Ignition status
Solid Green
4 - LAN Ports
10/100/1000Mbps PoE LAN ports
5 - USB Ports
Four USB 2.0 ports
6 - Hard Drive Bay
Removable 2.5" storage drive for easy
replacement of the storage
STATUS
NVR is recording
NVR is not recording / HDD is healthy
No HDD inserted / HDD not formatted correctly
Not Used
PoE power supply is active
Poe power supply fault
NVR is powered ON
Not Used
Ignition is ON
Advertisement
Table of Contents
