Storage Media; Hard Drive Canister - Safety Vision ROADRECORDER 8400 NVR User Manual

Storage Media

Hard Drive Canister

Use the following procedure to remove the hard
drive.
To remove the hard drive from the NVR:
1. Ensure the NVR is powered off.
2. Insert the key into the hard drive lock and
turn it clockwise.
3. Turn the two hard drive thumb screws
counter-clockwise until they are loose.
4. Pull the hard drive firmly straight out.
Once removed, the hard drive can be read
with the hard drive reader connected to a PC.
The computer recognizes the hard drive as an
external storage device.
User the following procedures to reinsert the
hard drive:
1. Push the hard drive firmly all the way into
the NVR.
2. Turn the two hard drive thumb screws
clockwise until they are secure.
Do not over-tighten the thumb screws. Use
finger pressure only!
3. Insert the key into the hard drive lock and
turn it ounter-clockwise.
ROADRECORDER 8400 NVR USER GUIDE 8