Table of Contents
Advertisement
ROADRECORDER 8400 NVR USER GUIDE
16
Sensor Inputs
The Sensor Inputs page configures settings for the
sensors.
Sensor Inputs
Select the number of triggers between 1 to 4.
Name
The NVR has trigger inputs, and for easy identification
these trigger inputs can be configured to have user
defined names which can be entered in this field for a
particular trigger input.
Restrictions: The name can contain any alphanumeric value
including single space & "_". The trigger input name can only be
15 characters max.
Action
User can set action on individual sensor inputs and on
the base of that data will be recorded. For now Metadata
is the only action supported for all events. Only Sensor 4
supports Backup Power. If user selects backup power event
on sensor 4 and trigger is inactive, NVR will shut down after
Timeout(MIN) specified.
Timeout(MIN)
User can select timeout if backup power is selected on
sensor 4. NVR will reboot after specified timeout. Minimum
timeout is 1 min and Maximum is 15 min.
Click Apply to save changed entries.
Advertisement
Table of Contents
