Step 2. Installing Sv Windows Application - Safety Vision ROADRECORDER 8400 NVR User Manual

11
Step 2. Installing SV Windows
Application
1.
After installing Windows OS, download and extract
the SV Windows application from Safety Vision's FTP
site. (Contact your Safety Vision Account Executive for
URL and login information to access Safety Vision's FTP
site.)
2. Launch the SV Installer
If prompted by firewall or anti-virus application, allow
the file to install.
3. Follow the steps of the SV Installer Setup window.
4. When you get to the Choose components window:
Enter the Windows Administrator User log in
credentials. (Contact your IT Administrator for
Windows credentials.)
5. Once setup is complete, select yes when prompted
with "Do you wish to reboot the system to apply
changes?"
System will reboot.
6. After system reboot is complete, launch the SV
Windows application (located in the window's tray) for
NVR configuration menus.
ROADRECORDER 8400 NVR USER GUIDE