Board Layout; Power Supply Circuit; Reset Circuit; Jumper Description - OLIMEX MOD-WiFi User Manual

BOARD LAYOUT:

POWER SUPPLY CIRCUIT:

MOD-WiFi is typically power supplied by UEXT pin 1 and pin 2 with 3.3V.
The board power consumption is about 110 mA.

RESET CIRCUIT:

MOD-WiFi reset circuit includes pull down R4 (4.7k) connected to MRF24WB0MA
pin 8 (JTAG_RST_N) and pin 21 (JTAG_EN).

JUMPER DESCRIPTION:

There are no jumpers on this board.
Page 6