C
ONTROL
The control panel of the A
start or stop treatment
•
adjust settings on the flow generator
•
mute or stop alarms
•
view treatment data.
•
QuickView key
Figure 14: The AutoSet CS2 control panel
LCD
Displays information about flow generator settings, alarms and treatment. The LCD
screen is backlit whenever any key is pressed. The lighting will turn off automatically
when no button has been pressed for 2 minutes, or can be set to stay on (see
"Options menu" on page 28).
An alarm message will overwrite any other message on the screen. The original screen
will reappear when any key is pressed.
S
TART
Press the key once to start or stop treatment.
•
U
/D
P
Moves backwards and forwards within a menu and between menus.
•
Increases and decreases values of parameters — press once to adjust in single
•
increments; hold down to move quickly through the values.
22
P
F
ANEL
UNCTIONS
UTO
Start/Stop
Left
key
key
SCREEN
/S
TOP KEY
OWN KEY
CS2 has a keypad that allows you to:
S
ET
LCD display
Up/Down
Right
key
key
Alarm LEDs
Alarm mute key