Humidifiers - ResMed Flow Generator AutoSet CS 2 User Manual

3 Attach the mask to the air tubing.
The mask system should already be assembled. If it is not, please refer to the user
instructions supplied with the mask.
Connect the mask system to the free end of the air tubing.
Figure 6: Assembling the AutoSet CS2 system
H
UMIDIFIERS
A humidifier may be required if you are experiencing dryness of the nose, throat or
mouth. The following ResMed humidifiers are compatible with the A
H A ™
UMID IRE
heated humidifier
H
UMIDIFIER ACCESSORY
Figure 7: Humidifiers compatible with the AutoSet CS2
When using a humidifier, stop the A
removing the mask to trigger the S
off at the power switch or the power source while it is running, as this could result in
condensation in the motor.
H A 2i™
UMID IRE
heated humidifier
(H A )
UMID IRE ONLY
Medium air tubing
(52cm)
S
UTO ET
S
MART TOP
Proximal cuff
H A
UMID IRE
passover humidifier
CS2 by using the Start/Stop key or by
function. Do not switch the A
T A S
HE UTO ET
S CS2:
UTO ET
2iC™
S CS2
UTO ET
CS2 S
YSTEM
13