Using Supplemental Oxygen - ResMed Flow Generator AutoSet CS 2 User Manual

U S
SING UPPLEMENTAL
If oxygen is being added at the mask, the oxygen tube is attached to the mask port.
Refer to your mask manual for full instructions.
Up to 15 L/min of oxygen can be added at the mask when using an A
system.
Oxygen tube
Figure 11: Oxygen tube attached to Mirage FFMS2 and Ultra Mirage masks
WARNINGS
!
If oxygen is used with this device, the oxygen flow must be turned off when the
•
device is not operating.
Explanation: When the device is not in operation, and the oxygen flow is left
on, oxygen delivered into the ventilator tubing may accumulate within the
device enclosure and create a risk of fire.
Always begin A
•
Always turn the oxygen supply off before stopping A
•
Oxygen supports combustion. Oxygen should not be used while smoking or in
•
the presence of an open flame.
O
XYGEN
CS2 therapy before the oxygen supply is turned on.
S
UTO ET
Oxygen tube
S
UTO
T A
HE UTO
S CS2
UTO ET
CS2 therapy.
ET
S CS2 S
ET YSTEM
19