1: Description And Features; 2: Gestures Overview - FIBARO SWIPE FGGC-001 Operating Manual

4

#1: Description and features

FIBARO Swipe is a revolutionary battery gesture control pad that
allows you to control devices in your Z-Wave network without actually
touching anything. Swipe up, down, left, right, make a circular gesture
and use sequences to get full and intuitive control of your home.
Installed device perfectly matches your interior design, as it resembles
a picture frame. You can even personalize it with your favourite
picture. Gesture controlled menu allow to add/remove or reset the
device without dismounting it.
The device is equipped with a buzzer that confirms performed
gestures and other actions.
i
NOTE
Main features of FIBARO Swipe:
This device may be
• Compatible with any Z-Wave or Z-Wave+ Controller.
used with all de-
• Supports protected mode (Z-Wave network security mode) with
vices certified with
AES-128 encryption.
the Z-Wave Plus cer-
tificate and should be
• Allows contactless gesture detection.
compatible with such
devices produced by
• Battery and/or vDC powered. When connected to an external, vDC
other manufacturers.
power source, the battery serves as an emergency power source.
• Gestures and actions are confirmed by the buzzer and can be
indicated additionally by the built-in LED diode.
• Gesture controlled menu - allows to operate the device without
i
NOTE
dismounting it.
FIBARO Swipe is a
Security Enabled
Z-Wave Plus product
and a Security Ena-
bled Z-Wave Control-
ler must be used in or-
der to fully utilize the
product.
DESCRIPTIOn AnD FEATuRES
FIBARO Swipe is a fully
compatible Z-Wave PLUS device.

#2: Gestures overview

Basic gestures are used to turn On and OFF associated devices or
trigger scenes.
Swipe up Swipe down
Swipe left Swipe right
Circular gestures are used to e.g. dim/brighten the lights or adjust
the blinds via associations. They can also trigger scenes.
After performing first circle, the device will start changing the value
(clockwise - increase, counter-clockwise - decrease). Withdrawing the
hand will stop the change.
Clockwise Counter clockwise
Sequences are composed of two or three gestures. user can create
up to 6 custom sequences. They can operate other devices via scenes
only.
Sequence
5
GESTuRES OvERvIEW