Table of Contents
Advertisement
Reverse this procedure to install the RTC battery.
Memory module
Description
16-GB (2400, 1.2-V DDR4)
8-GB (2400, 1.2-V DDR4)
4-GB (2400, 1.2-V DDR4)
Before removing the memory module, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
following components:
a.
Front-facing webcam/microphone module (see
on page
b.
Battery (see
c.
System board (see
Remove the memory module:
1.
Position the system board upside down with the rear edge toward you.
WARNING!
result in injuries.
2.
Remove the memory module shield that covers the memory module slots.
The memory module shield is available in the Bracket Kit, spare part number L03254-001.
54
Chapter 5 Removal and replacement procedures
43)
Battery on page
40)
System board on page
Take care when removing the memory module shield. The shield has sharp edges that can
Display panel assembly on page
Front-facing webcam/microphone module
47)
Spare part number
865396-855
862397-855
862398-855
30), and then remove the
Hide quick links:
Advertisement
Table of Contents
