Changing The Boot Order; Tpm Bios Settings (Select Products Only); Using Hp Sure Start (Select Products Only) - HP ZBook x2 Maintenance And Service Manual

Changing the boot order

To dynamically choose a boot device for the current startup sequence, follow these steps:
1. Turn off the tablet. Press the power button, quickly press and hold the volume down button until the
Startup menu is displayed, and then tap F9 to enter the Boot menu.
2. Select a boot device, press enter, and then follow the on-screen instructions.

TPM BIOS settings (select products only)

IMPORTANT:
that your intended use of TPM complies with relevant local laws, regulations and policies, and approvals or
licenses must be obtained if applicable. For any compliance issues arising from your operation/usage of TPM
which violates the above mentioned requirement, you shall bear all the liabilities wholly and solely. HP will not
be responsible for any related liabilities.
TPM provides additional security for your tablet. You can modify the TPM settings in Tablet Setup (BIOS).
NOTE: If you change the TPM setting to Hidden, TPM is not visible in the operating system.
To access TPM settings in Tablet Setup:
1. Start Tablet Setup. See
2. Select Security, select TPM Embedded Security, and then follow the on-screen instructions.

Using HP Sure Start (select products only)

Select tablet models are configured with HP Sure Start, a technology that monitors the tablet's BIOS for attacks
or corruption. If the BIOS becomes corrupted or is attacked, HP Sure Start automatically restores the BIOS to its
previously safe state, without user intervention.
HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default
configuration. The default configuration can be customized by advanced users.
To access the latest documentation on HP Sure Start, go to http://www.hp.com/support. Select Find your
product, and then follow the on-screen instructions.
62 Chapter 6 Tablet Setup (BIOS), TPM, and HP Sure Start
Before enabling Trusted Platform Module (TPM) functionality on this system, you must ensure
Starting Tablet Setup on page 59.