Rtc Battery - HP ZBook x2 Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see
following components:
a. Front-facing webcam/microphone module (see
on page
b. Battery (see
c. System board (see
Remove the RTC battery:
1. Position the system board upside down with the rear edge toward you.
2. Insert a case utility tool (1) or other similar flat-tipped, plastic tool into the slot on the RTC battery socket.
3. Release the RTC battery (2) from the socket.
4. Remove the RTC battery (3).
43)
Battery on page 40)
System board on page
Display panel assembly on page
Front-facing webcam/microphone module
47)
Spare part number
L03258-001
30), and then remove the
Component replacement procedures 53