Table of Contents
Advertisement
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
following components:
a.
Front-facing webcam/microphone module (see
on page
43)
b.
Battery (see
Battery on page
c.
System board (see
Remove the speakers:
1.
Remove the four Phillips M2.0×3.5 screws (1) that secure the speakers to the back cover.
2.
Release the retention tape (2) that secures the speaker cable to the back cover.
3.
Remove the speakers (3).
NOTE:
When removing the speakers, make note of the location of the four rubber isolators (4). Failure to
properly install or damage to these isolators can result in degraded speaker performance.
Reverse this procedure to install the speakers.
Display panel assembly on page
40)
System board on page
47)
30), and then remove the
Front-facing webcam/microphone module
Component replacement procedures
57
Hide quick links:
Advertisement
Table of Contents
