Barcode Reader - Thermo Scientific TriPlus RSH User Manual

Barcode Reader

Thermo Scientific
Table 19. SPME Conditioning Station - Operating and Environmental Requirements
Parameter
Operating temperature range
Maximum relative humidity
Vibration
Static electricity
The Barcode Reader is an active module used to decode and read barcodes applied in
horizontal bars on vials of 1 to 20 mL volume. See
Figure 46. Barcode Reader
The Barcode Reader consists of two scanners. The vial with the barcode label is positioned in
the middle. The distance between the two scanners is optimized by the scan angle. The two
scanners are activated one after another.
• If the first scanner can read and decode the barcode symbols, the second scanner is not
activated.
• If the first one fails, the second scanner is activated, and if the barcode is positively
interpreted the process is ended.
When both scanners cannot read the barcode, an error exception is run. The error handling
itself is part of the CDS software and in most cases you can select one of the following
options:
1
Getting Familiar with Your TriPlus RSH
Requirements
30 to 350 °C
80%, non-condensing
Negligible
Negligible
Figure 46.
TriPlus RSH User Guide

Barcode Reader

63