System Board - HP Spectre 13 Maintenance And Service Manual

System board

NOTE: All system board spare part kits include a processor and replacement thermal material.
Description
Equipped with an Intel Core i7-8550U 1.80-GHz (turbo up to 4.00-GHz) quad core processor (2133-MHz,
8.0-MB L3 cache, 15-W), an Intel UHD 620 graphics subsystem with UMA video memory, 16-GB of system
memory, and the Windows 10 operating system
Equipped with an Intel Core i7-8550U 1.80-GHz (turbo up to 4.00-GHz) quad core processor (2133-MHz,
8.0-MB L3 cache, 15-W), an Intel UHD 620 graphics subsystem with UMA video memory, 16-GB of system
memory, and a non-Windows operating system
Equipped with an Intel Core i7-8550U 1.80-GHz (turbo up to 4.00-GHz) quad core processor (2133-MHz,
8.0-MB L3 cache, 15-W), an Intel UHD 620 graphics subsystem with UMA video memory, 8-GB of system
memory, and the Windows 10 operating system
Equipped with an Intel Core i7-8550U 1.80-GHz (turbo up to 4.00-GHz) quad core processor (2133-MHz,
8.0-MB L3 cache, 15-W), an Intel UHD 620 graphics subsystem with UMA video memory, 8-GB of system
memory, and a non-Windows operating system
Equipped with an Intel Core i5-8250U 1.60-GHz (turbo up to 3.40-GHz) quad core processor (2133-MHz,
6.0-MB L3 cache, 15-W), an Intel UHD 620 graphics subsystem with UMA video memory, 8-GB of system
memory, and the Windows 10 operating system
Equipped with an Intel Core i5-8250U 1.60-GHz (turbo up to 3.40-GHz) quad core processor (2133-MHz,
6.0-MB L3 cache, 15-W), an Intel UHD 620 graphics subsystem with UMA video memory, 8-GB of system
memory, and a non-Windows operating system
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the fans (see
When replacing the system board, be sure to remove the heat sink (see
the defective system board and install it on the replacement system board.
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Speaker cables (two locations)
(2) Solid-state drive connector board ZIF connector cable
(3) Keyboard ZIF connector cable
(4) Backlight ZIF connector cable
(5) TouchPad ZIF connector cable
(6) Thermal sensor board ZIF connector cable
Bottom cover on page
Battery on page 32).
Fans on page 39).
30).
Heat sink on page
Component replacement procedures
Spare part number
941822-601
941822-001
941823-601
941823-001
941821-601
941821-001
44) from
41