NetComm 3G22WV User Manual page 49

Red irect to TCP & TCP P Port, Redirect to UD
You can also forward inc coming text message
mes sage.
The TCP/UDP address ca an be an IP address
For E Example: If someone e sends a text messag
at th e same time.
Com mpose
This page allows the use r to send a new text
A ne ew SMS message can n be sent to a maxim
"Fail ure" (in red).
By d default 10 recipient en ntry fields are shown
You can select to enable e or disable individua
After r entering the approp priate recipient numb
NetC Comm 3G22WV-I - HSP PA+ WiFi Router with V
49
P & UDP Port
s to a TCP/UDP base ed destination. The T TCP or UDP server ca
or domain name. Th e port number range e is from 1 to 65535. P
ge and Redirect to T CP is set to "192.168 8.20.3" and "2002", th
message to one or m multiple recipients.
Figure 48 ‐ Advan nced View ‐ SMS ‐ N
mum of 100 recipients s at the same time. Af fter sending the mes
on this page howeve er you can increase o or decrease this num
l message recipients s by selecting the che eckbox beside each
bers, type your SMS m message in the "Mess sage Body" field and
Voice User Guide
an be any kind of pub blic or private server if the server accepts
Please refer to your T TCP/UDP based SMS S server configuration
his text message is s tored in the router an nd forwarded to "192
New Message
sage, the result is dis splayed next to the d destination number as
mber by pressing the + or – button at right t side of the last recip
entered number.
d then click the "Send d" button.
s incoming text based d
n for which port to us e.
.168.20.3" on port "2 2002"
s "Success" (in blue) or
pient entry field.
YML2 22WVI
www.netcomm m.com