NetComm 3G22WV User Manual page 22

NETCO MM LIBERTY
DH HCP
The DHCP page is used to adjust the DHCP s
You can manually set the e DHCP Start and End
well as the NTP, TFTP an nd Option 150/Option
After r entering the applica able details, click "Sa
You can also assign a pa articular IP address to
1. Click Add
2. Enter a nam me for the computer o
3. Enter the co omputer or devices'
4. Enter the IP P address to be assig
5. Click "Save e"
DH HCP Relay Conf figuration
To re elay the DHCP functi on from a remote DH
1. Set the "DH HCP Relay" option to
2. Enter the IP P Address of the DHC
YML L22WVI
www w.netcomm.com
™ SERIES -
settings used by the router. The DHCP se ettings are then passe
d range, the DHCP L Lease time, the defau ult Domain name suff
n 160 (VoIP options) s settings.
Figu ure 15 ‐ DHCP Settin
ave".
o a specific device e very time that device e makes a DHCP req
Figure 16 ‐ DHCP P Settings ‐ Fixed M
or device.
MAC address
gned to the compute r or device.
HCP server select the e "DHCP Relay Config guration" link at the to
Figure 17: DHCP Settings ‐ DHCP Re
Enable.
CP Server you wish to o relay to and press t the Save button.
ed onto any device c connecting via DHCP P.
ix, Primary and Seco ndary DNS Server, th he Primary and Seco
ngs
uest as follows:
apping
op of the page.
elay Configuration
NetComm 3G2 22WV-I - HSPA+ WiFi
ondary WINS Server, as
Router with Voice Use er Guide
22