Mitsubishi Electric FR-A700 Installation Manualline page 12

2)Attach protective bushes provided to the wiring cover and cut with nippers or a cutter before running the cables.
Connect the wire with red sleeve to PR terminal. Connect the wire with transparent sleeve to P/+.
Protective bushes
(Accessory)
(3) Installation of the inverter
CAUTION
When handling the wiring cover, care must be taken not to cut fingers or hands with sharp edges and burrs.
Avoid wire offcuts and other foreign matter from entering the inverter.
Do not wire without using protective bushes. Otherwise, the cable sheathes may be scratched by the wiring
cover edges, resulting in a short circuit or ground fault.
(Red sleeve)
To PR terminal.
(Transparent sleeve)
To P/+ terminal.
WARNING
WIRING
9