Adtec mediaHUB-HD 422 Quick Start Manual

Getting Started

Thank you for your purchase of the Adtec mediaHUB-HD 422 Encoder.
This Multi-CODEC Encoder supports both MPEG 2 and MPEG 4 AVC standard and
high definition encoding at 420 and 422 profiles. Further instructions are available
via the manual integrated into the on-board software. You can view it by looking
for the HELP tab once your unit is powered up and you are connected to the
web-application. See back for more details. This manual and the most recent
firmware are available on our support website, www.adtecinc.com. Advanced users
can also find direct API command help as part of the on-board web application.

Front Panel LEDs:

Encode
Not Active
Pre-rolling
(Studio Encoding)
Encoding
Transition
(Encoding to Idling)
Video
No Video
(Audio Only)
Video Present
Not Supported
No Video Present
Resolution
Standard Definition
(NTSC / PAL)
1080i HD
720p HD
Audio 1 - 4
Audio Not Enabled
Audio Enabled
Decode
Not Active
Decoding
CDE/ASI
Confidence Decoding
ASI Recieving
Adtec Digital Technical Support: 615.256.6619 www.adtecinc.com
TM
Control
Control Mode Off
Control Detected/Remote Mode
Control Detected/Local Mode
Alarm
No Encoder Alarm
Encoder Alarm
MP2/AVC
Encoding MPEG 2
Encoding MPEG 4 AVC
420/422
Encoding 4:2:0 Chroma
Encoding 4:2:2 Chroma
Resolution
Standard Definition
1080i HD
720p HD
09.21.09
Multi-CODEC HD 422 Encoder

Front Panel Menus:

Use Mode Button to move through top layer menus.
Use arrows for navigation in submenus.
Use select to enter into edit mode and
Encoder Encoder
System Decoder
Video
Login
Status Status
Sample Freq.
Duration Rate A1
Conf. Decode
Network A3
Auto Res. CODEC
Time Display Chroma
NTP Input
DVB-ASI Menu
Alarm GOP
Aud. Track
GOP Str.
Mirror
SDI Aud. Matrix
COM2 GOP Size
SDI Pass
Firmware
Latency

System LED Status

Power
Busy
Power is OFF
No Network Traffic
Power is ON
Network Traffic Present
Alarm
(Not Used)
Aux
No System Alarm
Minor Alarm
Major Alarm
Link
No Link Detected
Link Active
enter to save selection.
Transmit PID
Table
Audio
Mux Rate Table
PCR
Prog. No. VBI Source
A2 Vid. AutoFill
A4 Map PID Closed Cap.
IP Destinations 1-4
Vid. PID
Sync Service Name
Aud.1 PID
Input
Aud. 2 PID
Mode
logged in by default. If you become
Aud. 3 PID
Type
logged out and are prompted for a
password, use the following key
Bitrate Aud. 4 PID
sequence for access.
Press <Select> when panel displays
AMOL
Volume
Press <Up arrow>
Press <Select>
Splice
Press <Enter>
Press <Right arrow>
Press <Enter>
Front Panel Status
Video Resolution Frame Rate Video Bit Rate
1920x1080 29i 33.77M
1DD 192K 2DD 192K 48
Audio Input 1 & 2
Quick Start Guide
Encrypt.
Pro le
Mode
Load
Clear Word
Save
Encrypt Word
User ID 1
UserID 2
Units ship with the front panel
'User Login -- logged out'
Sampling Rate