Advertisement
1. Outline
The M30262T-PTC is a converter board for the M30262Group
for connecting an emulator for the M16C/62P to M30262
(48P6Q-A)
2. Package Components (See Figure 1)
(1) M30262T-PTC
(Base board M30262T-PTCB and 150mm FFC cable
included)
(2) YQPACK048SD (by Tokyo Eletech Corporation)
(3) NQPACK048SD (by Tokyo Eletech Corporation)
(4) YQ-GUIDE's (4 pcs., by Tokyo Eletech Corporation)1 pkg.
(5) M30262T-PTC User's Manual (This manual)
3. Specifications
Table 1 Specifications
Applicable
package
M30262T-PTC and YQPACK048SD
Insertion/removal
iterations of
M30262T-PTC and emulator for
connector
4. Usage (See Figure 2)
The M30262T-PTC can be used for debugging and onboard
evaluation in common by mounting the NQPACK048SD on
the target board.
(1) For debugging
Mount the NQPACK048SD and the YQPACK048SDin
that order on the foot pattern of the target board. Then
attach the YQ-GUIDE's to the YQPACK048SD to
connect the M30262T-PTC. Do not use the screws
included with the YQPACK048SD. Finally, connect the
emulator for M16C/62P to the M30262T-PTC.
(2) For onboard evaluation
Mount the M30262 MCU and the HQPACK048SD (not
included) in that order on the NQPACK048SD on the user
system. Then secure the screws.
Before using the M30262T-PTC, be sure to read "9.
Precautions" (page 4). And, read the user's manual of an
emulator for M16C/62P.
48P6Q-A
(48-pin 0.5-mm-pitch QFP)
100 times guaranteed
M16C/62P
20 times guaranteed
1 pc.
1 pc.
1 pc.
YQPACK048SD
1 pc.
Figure 1 Package components of the M30262T-PTC
(1) Debugging
Emulator for M16C/62P
(PC7501 + M3062PT-EPB)
M30262T-PTCB
YQPACK048SD
NQPACK048SD
●
Be sure to align the pins.
Figure 2 Usage of the M30262T-PTC
( 2/4 )
M30262T-PTC
NQPACK048SD
YQ-GUIDE's (x4)
(PC4701 + M3062PT3-RPD-E)
(2) Onboard evaluation
YQ-GUIDE's
(x4)
48-pin 0.5-mm-pitch
(48P6Q-A) foot pattern
:No. 1 pin
HQPACK048SD
(not included)
M30262 MCU with
flash memory
Advertisement
