Set As Current Project; Remove Project; Unload Project; Add Files From Kernel Dir - Renesas FLASH Development Toolkit 3.07 User Manual

8.1.2.7. Set as current Project

Sets the highlighted project as the current active project. This option is not available if the highlighted
project is already the active project.

8.1.2.8. Remove Project

Remove the highlighted project from the Workspace. This option is not available if the highlighted project
is the active project.

8.1.2.9. Unload Project

Unloads the highlighted project from the Workspace. This option is not available if the highlighted project
is the active project. Note that any changes to the project made since the last save, will be lost when the
project is unloaded (FDT will not prompt to save changes before unloading).

8.1.2.10. Add Files From Kernel Dir...

This allows the user to select files from the current kernel directory and add those files to the current
project.
8.1.3

Device Image - Folder

This contains the Device Image file(s) for the project. The device image will be called the same as the
project but with a .ddi extension.
Figure 8-4 Device Image Folder
In addition to the Allow Docking and Hidemenu items inherited from the workspace, Device Image - Sub
Folder pop-up menu has the following items:

8.1.3.1. Remove Folder

Allows the user to delete folders.

8.1.3.2. Rename Folder

Allows the folder to be renamed.
78