Generic Boot - Choose Device And Kernel - Renesas FLASH Development Toolkit 3.07 User Manual

For windows 98se/me, windows nt 4.0, windows 2000 and windows xp flash microcomputer programming system

Table of Contents

3.5.2

Generic Boot - Choose Device and Kernel

Select 'Generic Boot Device' (or a device supported by Generic Boot) and click 'Next'.

Note - Some Protocol C devices which appear in the device list are supported by using Generic Boot. This

means that when one of these devices is selected in the Project Wizard, FDT will behave as if

"Generic BOOT Device" was selected, and will connect to the device to obtain the device

characteristics instead of using an existing fcf file for this information.

Figure 3-13

Generic Boot Device Selection

Figure 3-14

Device Support via Generic Boot

Table of Contents

Do you have a question about the FLASH Development Toolkit 3.07 and is the answer not in the manual?

Hs6400fdiw3s