®
This is the method used when an FDT workspace is double clicked in Windows
Explorer
3.3.9.3. Opening data files from the command line with Access Rights password security enabled
"<FDT path>\FDT.exe" "arl \"<Username>\" \"<Password>\"" /DISCRETESTARTUP "osre \"< Filename
>\""
eg
"C:\Program Files\Renesas\FDT3.07\FDT.exe" "arl \"Administrator\" \"password\""
/DISCRETESTARTUP "osre \"C:\Program Files\Renesas\files\myfile.mot\""
3.3.9.4. Opening w4f Script Configuration files from the command line
"<FDT path>\FDT.exe" /DISCRETESTARTUP "w4fRun \"<filename>\""
eg
"C:\Program Files\Renesas\FDT3.07\FDT.exe" /DISCRETESTARTUP "w4fRun \"C:\Program
Files\Renesas\FDT3.07\myconfig.w4f\""
®
This is the method used when an FDT Script Configuration file is double clicked in Windows
Explorer
3.3.9.5. Opening w4f Script Configuration files from the command line with Access Rights
password security enabled
"<FDT path>\FDT.exe" "arl \"<Username>\" \"<Password>\"" /DISCRETESTARTUP "w4fRun
\"<filename>\""
eg
"C:\Program Files\Renesas\FDT3.07\FDT.exe" "arl \"Administrator\" \"password\""
/DISCRETESTARTUP "w4fRun \"C:\Program Files\Renesas\FDT3.07\myconfig.w4f\""
3.3.9.6. Starting FDT Basic Simple Interface Mode from the command line
"<FDT path>\FDT.exe" /DISCRETESTARTUP "SimpleInterfaceMode /u \"<User Area Filename>\" /b
\"<User Boot Area or Data Area Filename>\""
eg
"C:\Program Files\Renesas\FDT3.07\FDT.exe" /DISCRETESTARTUP "SimpleInterfaceMode /u
\"c:\upload1.mot\" /b \"c:\upload0.mot\""
Note that the /u <User Area Filename> and the /b <User Boot Area> are optional. Additionally, adding /r
causes the last settings to be restored and the configuration Wizard will not be displayed.
19
Need help?
Do you have a question about the FLASH Development Toolkit 3.07 and is the answer not in the manual?
Questions and answers