Window Menu; Cascade; Tile Horizontally; Tile Vertically - Renesas FLASH Development Toolkit 3.07 User Manual

7.6

Window Menu

The 'Window' menu is used to alter the display of currently open windows within the FDT GUI. Files
displayed in the Editor window are appended to the following list, these files are identified by their
filename and the currently active file is denoted by check mark.
7.6.1

Cascade

This option allows multiple windows to be staggered so that each file is visible.
7.6.2

Tile Horizontally

This option allows the windows to be displayed with maximum possible horizontal width.
7.6.3

Tile Vertically

This option allows the windows to be displayed with maximum possible vertical height.
7.6.4

Arrange Icons

This option arranges the file icons in rows at the bottom of the screen.
7.6.5

Close All

This option closes any files open in the editor window.
7.6.6

'file name'

This option becomes active when a file name is selected and checked.
7.7

Device Menu

The 'Device' menu provides control facilities for interacting with the target device.
7.7.1

Connect to Device

This connects the GUI to the device if it is not connected. Progress messages will appear in the Output
window.
7.7.2

Disconnect

This disconnects the GUI from the device if it is connected. Progress messages will appear in the output
window.
7.7.3

Erase FLASH blocks

This launches the 'Erase Blocks' dialog box.
The 'Erase Blocks' dialog box allows the user to specify which blocks are to be erased. The Written
column indicates whether data is present in the block.
To start the operation, select the required block names in the list and then click the Erase button.
71