Record - Rigol MSO4000 Series Quick Manual

provides three cursor modes: manual, track and auto.
Display: press this key to enter the display setting menu to set the display type,

persistence time, wave intensity, grid type, grid brightness and menu display
time of the waveform.
Utility: press this key to enter the system function setting menu to set the

system-related functions or parameters, such as I/O setting, sound and
language. The oscilloscope also supports some advanced functions such as
pass/fail test and print setting.
Record: press this key to enter the waveform record menu. The oscilloscope

provides waveform record function and supports record constant open mode as
well as playback and analysis of recorded waveform.
Help: press this key to open the help interface. For detailed information, please

refer to the introduction in "To Use the Built-in Help System".

Record

Stop Play/Pause Record
Record: press this key to start recording the waveform. The backlight is

illuminated in red. Besides, the backlight will also be illuminated when record
constant on (open) mode is enabled.
Play/Pause: in stop or pause state, press this key to play back the waveform

and press again to pause the play. The backlight is illuminated in yellow.
Stop: press this key to stop the waveform in record or playback mode. The

backlight is illuminated in orange.
MSO4000/DS4000 Quick Guide
RIGOL
17