Trigger; Clear - Rigol MSO4000 Series Quick Manual

TRIGGER



MENU: press this key to turn on the trigger operation menu. This oscilloscope

provides various trigger types.
FORCE: in Normal and Single trigger modes, press this key to generate a

trigger signal forcefully.
50%: press this key to set the trigger level to the vertical midpoint of the

trigger signal amplitude.

CLEAR

MSO4000/DS4000 Quick Guide
MODE: press this key to switch the trigger mode to Auto,
Normal or Single and the state backlight of the current
trigger mode would be illuminated.
TRIGGER LEVEL: modify the trigger level. Turn clockwise
to increase the level and turn counterclockwise to reduce the
level. During the modification, the trigger level line moves up
and down and the value in the trigger level message box (e.g.
) at the lower-left corner of the screen would
change accordingly. Press down the knob to quickly reset the
trigger level to zero point.
Press this key to clear all the waveforms on the screen. If the
oscilloscope is in "Run" state, waveforms will still be displayed.
RIGOL
13