Call Forward; To Configure Call Forward, When The Device Is In The Default Standby Mode; Select Line For Call Forward Configuration - Fanvil X4 User Manual

Call Forward

Call forward is also known as 'Call Divert' which is to divert the incoming call to a specific number
based on the conditions and configurations. User can configure the call forward settings of each line.
There are three types,
 Unconditional Call Forward – Forward any incoming call to the configured number.
 Call Forward on Busy – When user is busy, the incoming call will be forwarded to the configured
number.
 Call Forward on No Answer – When user does not answer the incoming call after the configured
delay time, the incoming call will be forwarded to the configured number.
To configure call forward, when the device is in the default standby mode, Press
soft-button [Menu] till you find the [Features] item.

Enter [Features] item till you find the [Call Forward] item.

Press [Call Forward] button to open call forward configuration screen, select the line to be
configured with up/down navigation keys.

Press [Enter] button to edit the call forward settings.

Select the call forward type with up/down navigation keys. Click [Enter] button to configure the
call forward number and delay time, if applicable.

Enable or Disable call forward with left/right navigation buttons against specific lines and types.
 If select 'Enable', browse the setting parameters with up/down navigation keys and enter required
information. When done, press [Save] / [OK] button to save the changes.
Figure 61 - Select Line for Call Forward Configuration
<文档标题>