Dnd Enabled On All Lines; Configure Dnd On Line - Fanvil X4 User Manual


Press [DND] button again to disable DND on all line and icon
If user wishes to enable or disable DND on a specific line, user could change the DND mode in DND
configurations.

Press soft-button [Menu] till you find the [Features] item.

Enter [Features] item till you find the [DND] item.

Enter DND edit page

Press left/right navigation key to change the DND mode or DND state on specific line. When
done, press [Save] button to save the changes.

User will see icon
Figure 57 - DND Enabled on All Lines
' Do Not Disturb ' against the enabled line.
Figure 58 - Configure DND on Line
<文档标题>
will be disappeared.