New Voice Message Notification; When The Device Is In The Default Standby Mode - Fanvil X4 User Manual

message notification from the server and device will prompt a voice message waiting icon on the
standby screen,
To retrieve the voice messages, user must configure the voice message number first. Once the voice
message number is configured, user can retrieve the voice message of a line by pressing the [Dial]
button in the voice message screen.

When the device is in the default standby mode,


Click the [MWI] button.（As default , there is a configured MWI DSSKEY, You can also press
[Menu] / [Applications] / [Voice Massage] to enter MWI interface]））

Open voice message configuration interface, select the line to be configured with up/down
navigation keys.

Press [Edit] button to enable and edit the voice message number, when done, press [OK] / [Save]
button to save the configuration.
Figure 54 - New Voice Message Notification
<文档标题>