Display Brightness; Dark Display; Machine Switch-Off; Display Maximum Load - Miele WTH 120 WPM Operating Instructions Manual

Display brightness

There are seven different display
brightness settings.
The brightness changes as soon as you
select a different setting.

Dark display

To save energy, the display will go out
and the Start/Stop button will flash
slowly.
Options
– On
The display will go out after 10
minutes.
– On (not in current programme)
(Factory default setting)
The display will remain on while the
programme is running but will go out
10 minutes after the end of the
programme.
– Off
The display will remain on.

Machine switch-off

The washer-dryer will switch off
automatically after the end of the
programme/anti-crease phase or after
being switched on if no further
selection is made.
Options
– After 15 minutes (Factory default
setting)
The washer-dryer will switch itself off
after 15 minutes.
– After 20 minutes
The washer-dryer will switch itself off
after 20 minutes.
– After 30 minutes
The washer-dryer will switch itself off
after 30 minutes.

Display maximum load

After a programme is selected the
maximum load appears in the display
for a short time. You can switch this
off.
Factory default setting: Display
maximum load is switched on.

Display programme name

The name of the selected programme
is shown briefly in the display.
The factory default setting for Display
programme name is switched off.
Settings
111