Instruction Manual
Anti-freeze Transfer Pump
Packages
Used to supply anti-freeze in a Matrix
Part No. 248321, 5:1 Monark
120 psi (0.8 MPA, 8.4 bar) Maximum Air Inlet Pressure
600 psi (4.2 MPa, 42 bar) Maximum Fluid Working Pressure
Part No. 248322, 5:1 Monark
For use with 55 gallon drums
180 psi (1.25 MPA, 12.5 bar) Maximum Air Inlet Pressure
900 psi (6.3 MPA, 63 bar) Maximum Fluid Working Pressure
Part No. 248323, 3:1 President
166 psi (1.1MPA, 11 bar) Maximum Air Working Pressure
500 psi (3.4 MPA, 34 bar) Maximum Fluid Working Pressure
Read warnings and instructions.
See the individual pump and motor
manuals referenced, for important
safety warnings and installation,
operation, and service instructions.
®
A CleanLine
filter must be used
whenever Matrix meters are used to
dispense oil or anti-freeze. Use the
high-pressure, wall-mount CleanLine
filter unit (248419) for anti-freeze mix-
tures. Low-pressure CleanLine filter
models are not compatible with
anti-freeze.
Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2004, Graco Inc. is registered to I.S. EN ISO 9001
®
system.
®
Stubby
®
®
Stubby
248321 Shown
310650 rev.B
TI4497