Cooling System; Radiator Cover; Installing The Radiator Cover - KTM 125 SX 2018 Owner's Manual

14

COOLING SYSTEM

14.1 Cooling system
14.2

Radiator cover

14.3

Installing the radiator cover

1
Water pump
The pressure resulting from the warming of the cooling system is regulated by a valve
in radiator cap
temperature will not result in a risk of malfunctions.
120 °C (248 °F)
Cooling is effected by the air stream.
The lower the speed, the less the cooling effect. Dirty cooling fins also reduce the cool-
ing effect.
K00866-10
The radiator cover is mounted in front of the left radiator between the radiator shield
and radiator.
The radiator cover keeps the coolant temperature in the correct range.
Coolant temperature
K00459-01
The radiator cover is installed in front of the left radiator, depending on the ambient
temperature.
Full radiator cover
Half radiator cover
No radiator cover
Info
M01121-10
Do not use both radiator covers at the same time.
–
Remove screws
–
Remove screws
–
Take off radiator shield
K00460-10
–
Position the matching radiator cover (
The larger catch is located at the top left.
Info
Do not use both radiator covers at the same time.
H01341-10
in the engine ensures forced circulation of the coolant.
2
. This ensures that operating the vehicle at the specified coolant
65... 70 °C (149... 158 °F)
< 7 °C (< 45 °F)
1
7... 16 °C (45... 61 °F)
2
> 16 °C (> 61 °F)
1
.
2
.
3
.
p. 76).
76