MAINTENANCE WORK ON CHASSIS AND ENGINE
Cooling system
9.65
–
Mount and tighten screws
Guideline
Remaining screws, chassis
–
Mount the seat. (
100285-11
The water pump
The pressure resulting from the warming of the cooling system is regulated by a valve in
the radiator cap
tank
. If the temperature falls, the excess coolant is sucked back into the cooling system.
The specified coolant temperature is therefore permissible without danger of function prob-
lems.
125 °C (257 °F)
600614-10
.
S. 110)
in the engine forces the coolant to flow.
. Heat expansion causes excess coolant to flow into the compensating
M6
10 Nm (7.4 lbf ft)
128