Removing Memory Modules; Memory Support; Memory Population Guidelines - Supermicro Superserver MicroCloud 5038MA-H24TRF User Manual

S S
UPER ERVER 5038MA-H24TRF User's Manual

Removing Memory Modules

Use your thumbs to gently push the side clips near both ends away from the module
to release it from the socket. Once the module is loosened from the socket, pull
the DIMMs module upwards.

Memory Support

Each A1SA2-2750F has eight memory slots that can support up to 64 GB of ECC
DDR3-1600 UDIMM (Unbuffered), VLP (Very Low Profi le) memory. This equates
to a maximum of 768 GB for the system. Memory modules of the same size and
speed should be used. See Chapter 5 for details. Please refer to the product page
on our web site for possible updates to memory support.

Memory Population Guidelines

Please follow the table below when populating the serverboard.
DIMM Slots per DIMMs Populat-
Channel ed per Channel
2
2
Figure 5-1. Populating DIMM Slots
DIMMA1
DIMMA2
DIMMB1
DIMMB2
DDR3 ECC VLP UDIMM Memory
DIMM Type
DDR3 VLP
1
UDIMM
DDR3 VLP
2
UDIMM
5-4
1
DIMMD2
DIMMD1
DIMMC2
DIMMC1
Memory Population
POR Speeds
1600 A1, B1 (2 DIMMs)
A1, B1, A2, B2
1600
Sequence
(4 DIMMs)