Smart Update Manager; Uefi System Utilities; Using Uefi System Utilities - HP ProLiant ML30 Gen9 User Manual

For more information or to download SPP, see one of the following pages on the Hewlett Packard Enterprise
website:
• Service Pack for ProLiant download page
• Smart Update: Server Firmware and Driver Updates page

Smart Update Manager

SUM is a product used to install and update firmware, drivers, and systems software on ProLiant servers.
SUM provides a GUI, a command-line scriptable interface, and an interactive command-line scriptable
interface. The interfaces allow you to deploy firmware, drivers, and software for supported servers.
For more information about SUM, see the product page on the Hewlett Packard Enterprise website.
To download SUM, see the Hewlett Packard Enterprise website.
To access the Smart Update Manager User Guide, see the Hewlett Packard Enterprise Information
Library.

UEFI System Utilities

The UEFI System Utilities is embedded in the system ROM. The UEFI System Utilities enable you to perform
a wide range of configuration activities, including:
• Configuring system devices and installed options
• Enabling and disabling system features
• Displaying system information
• Selecting the primary boot controller
• Configuring memory options
• Selecting a language
• Launching other preboot environments such as the Embedded UEFI Shell and Intelligent Provisioning
For more information, see the UEFI System Utilities user guide for your product on the Hewlett Packard
Enterprise website.
To access mobile-ready online help for the UEFI System Utilities and UEFI Shell, scan the QR code at the
bottom of the screen. For on-screen help, press the F1 key.

Using UEFI System Utilities

To use the System Utilities, use the following keys.
Action
Access System Utilities
Navigate menus
Select items
Save selections
Access Help for a highlighted configuration
1
option
1
Scan the QR code on the screen to access online help for the UEFI
System Utilities and UEFI Shell.
Default configuration settings are applied to the server at one of the following times:
Key
F9 during server
POST
Up and Down
arrows
Enter
F10
F1
Smart Update Manager 89